Mgo board Construction instructions and Seaming handle
(A) The seams of the single-layer cover panel on both sides of the keel, and the seams of the inner and outer layers of the double-layer cover panel on the same side of the keel frame should be staggered, that is, the joints cannot fall on the same keel. .
(B) 3-5mm board seam should be reserved when the boards are docked.
(C) Clean the seam and fill the caulking material (elastic caulking material should be used according to the characteristics of glass magnesium plate).
(D) After the caulking material is filled and compacted, a glass fiber mesh belt or a polymer material mesh belt is adhered to the seam of the board, and then a layer of putty is applied and scraped.
Please see details as below:
MAR
2020