Blog

 

Raw material : Pure quartz powder , quick lime , Portland cement , cellulose and some kinds of fined mineral additives

including suspending additive . We make the raw material into a wet sheet and then through high temperature and high

pressure autoclave for more than 10 hours by advanced technology to have the final product . It will compose a special

Calcium Silicate Board .

There is no asbestos , brucite and meerschaum in the raw materials and the formulation at all .

 

Advantages :

Light Weight Fireproof Calcium Silicate Board

1.Through-coloured base board ,with coliured varnish which gives a natural appearance .
2. Durable . More than 60% of the composition is same as granite , more than 20% same as marble .
3.High strength , good at impact resistance .
4. Resistant to high tempeartures
5. Excellent weather resistance , water resistant
6.Outstanding sound insulation capability .
7.Non combustible , no flame spread , no fune development , no toxic gasses
8.Low moisture and water absorption.
9.Resistant to fungus, bacteria , insects , vermin, etc.
10.It is non-radioactive.
11. Resistant to many chemicals

Technical specification 

 

• Specification

Standard thickness	Width	Length
mm
9,12,15,18,20,24	1220	2440
Remark: we can offer other specifications according to client’s special requirement.

 

• Tolerance in dimension:

Iem		Requirement
Length	<1200	±3
	1200~2400	±4
	>2400	±5
Width	≤1200	±3
	>1200	±4
Thickness	≤9	±0.3
	9~15	±0.5
	>15	±0.6

• Tolerance in shape:

Item	Requirement
Edge straightness, mm/m	≤2
Squareness, mm/m	≤3
Surface uneven, mm/m	≤3
Thickness uneven %	≤6

• Physical properties:

Item			Index	Unit
Density			≤0.95	g/cm3
Thermal conductivity			≤0.20	W/(m·k)
Water contain			≤10	%
Moisture movement			≤0.25	%
Non –combustibility			GB8624 class A1, BS476 part  4, 6, 7	/
Bending strength	Oven dry	Cross	≥7.0	Mpa
		Parallel	≥5.5	Mpa
Remark: please contact our technical department if you need more technical index.

• Safety capability:

Item	Index	Introduction
Asbestos	100% asbestos including	Safe for application
Radioactive	<1.0IRa	Safe for application
	<1.0Ir	Safe for application
Non –combustibility	A1	The highest grade

 

Applications

• Tunnel lining, concrete floor and wall upgrading
• M&E services enclosure
• Access panels and hatches, fire doors
• Structural steel protection
• Membrane ceilings
• Cladding to steel ducts, self-supporting ducts