Blog

HomeBlogCeiling T-grid

Ceiling T-grid

T-Bar,T-GridT-grid is made from hot cold-rolled galvanized steel, pressed to T shape after cooling, baked paint on surface finish.

Advantage:

  • High grade galvanized steel as main material, non-deforming, fadeless, moisture proof and anti-corrosive.
  • Strong close clip, better symmetry
  • High load capacity
  • Easy and fast installation, save installing time and labor cost
  • Large production line and strict product inspection, so larger quantity and better quality are available

Specification:

Narrow Plane 32 Specification

(mm)

 Narrow Notch 32
(White/Black)		 Specification

(mm)

 Solid Notch 32 Specification

(mm)
Main Tee 32*14*3000           Main Keel 32*14*3000 Main Keel 32*16*3000
Cross Tee 32*14*600 Cross Tee 32*14*600 Cross Tee 32*16*600
32*14*1200 32*14*1200 32*16*1200
Wall Angle 20*15*3000 Wall Angle 20*15*3000 Wall Angle 20*15*3000
Narrow Plane 38 Specification

(mm)

 Narrow Notch 38
(White/Black)		 Specification

(mm)

 Solid Notch 38 Specification

(mm)
Main Tee 38*14*3000           Main Tee 38*14*3000 Main Keel 38*16*3000
Cross Tee 38*14*600 Cross Tee 38*14*600 Cross Tee 38*16*600
38*14*1200 38*14*1200 38*16*1200
Wall Angle 20*15*3000 Wall Angle 20*15*3000 Wall Angle 20*15*3000
Wide Plane 32 Specification

(mm)

 Wide Notch 28
(White/Black)		 Specification

(mm)

 Wide Notch 32
(White/Black)		 Specification

(mm)
Main Tee 32*24*3000 Main Tee 28*24*3000 Main Keel 32*24*3000
Cross Tee 28*24*600 Cross Tee 28*24*600 Cross Tee 32*24*600
28*24*1200 28*24*1200 32*24*1200
Wall Angle 22*22*3000 Wall Angle 22*22*3000 Wall Angle 22*22*3000

 

Technical performance:

Inspection item Unit National Standard Test Result
Appearance —— No damage No
Hole Distance Difference mm ±0.3 ±0.1
Difference of galvanized strip thickness mm ±0.04 0.03
Difference of baking paint thickness mm ±0.04 25
Width  Difference mm ±0.5 0.1-0.2
Length Difference mm ±1.0 0.4-0.5
Underside straight Limitation mm/1000mm ≤1.3 0.5
Galvanized thickness µm ≥14 16
Load bending Limitation mm ≤2.8 2

 

0

Add a Comment